Casa> Blog
August 13, 2019
Good tool holder, these items must be up to standard!

1. System Accuracy: System Accuracy includes System Positioning and Holding Accuracy and Tool Repeated Positioning Accuracy. The former refers to Tool a

August 07, 2019
Introduction of taper of BT40 and BT50 high speed tool holder

In general, the most commonly used tool holder is BT tool holder. When the taper of BT tool holder is 7:24 And the speed is about 10,000 r/min, the tool

August 06, 2019
Structure and Application of HSK Tool Handle

HSK (German and Italian Hohl Schaft Kegel abbreviation) tool handle is a kind of double-sided clamping tool handle developed by the Institute of Machine

August 01, 2019
What requirements should high-speed tool holder meet in high-speed cutting?

1. System accuracy: The accuracy of the system includes the accuracy of positioning and cl

July 31, 2019
How to improve the surface finish of the tool holder?

Product Description: The name of a process before coating after finishing is not uniform at home and abroad. It is called "edge passivation", "edge stre

July 29, 2019
Introduction to Basic Knowledge of_BT Type CNC Tool Handle

BT CNC tool holder is mainly a Japanese standard, and it is also a commonly used standard. The universal tool handle with taper of 7:24 has five standar

July 26, 2019
Application of Tool Compensation in CNC Machining

In CNC machining, because the path of tool location controlled by program does not coincide with the shape of actual cutting edge, there is a difference

July 25, 2019
Introduction of Tool Holder for Turning-milling Composite Machining Center

1. What is a Turning-Milling compound machining center? Turning-milling compound m

July 23, 2019
Characteristics and Application of BT and HSK Tool Holders

HSK handle is a high-speed handle, especially the E series keyless groove is the highest dynam

July 18, 2019
Is the tool holder of a machine tool a tool?

Tool shank is the connection of machine tool and tool. Tool shank is a key link affecting concentricity and dynamic balance. It must not be treated as a

July 16, 2019
What are the classifications of machining centers?

CNC milling machine is a kind of automatic processing equipment developed on the basis of general milling machine. The processing technology and structu

July 11, 2019
ISO Tool Holder Standard

Is07388/1 is the international standard. ISO standards refer to the standards formulated by the International Organization for Standardization (ISO). Th

July 09, 2019
Boring machine pull stud

There are JBR-50L100 and JBR-50L125 types of broaching nails for boring machine, which are mainly used in boring machine. Jinghua CNC nails are ma

July 04, 2019
Installation method of spring clamp collet

1. Firstly, the chuck is put into the nut and rotated gently. Then the eccentric part of the nut is concaved into the chute of the chuck spring. T

July 02, 2019
Fault Analysis of CNC Tool Holder

As an important configuration of the CNC lathe, the tool holder plays a vital role in the operation of the machine. Once the failure occurs, it is likely to cause the workpiece to be scrapped or

May 14, 2019
Simple drill chuck key

The drill chuck is one of the most commonly used tools for the drill press. The clamping is carried out by the small bevel gear of the key. The nut of t

May 09, 2019
How does a drill chuck work?

A drill chuck is a specialized clamp designed to hold drill bits in place while they are being rotated by the drill. The chucks nearly always have three jaws that press down on the drill bit so that i

April 23, 2019
Teach you how to use a spanner

Introduction: One of the hardware tools commonly used in o

April 17, 2019
Extend the life of the collet

The feeding spring collet of our factory single-axis automatic lathe has a long service life, the chuck is worn, and the elastic force is reduced, which

April 15, 2019
CNC tool holder fault resolution analysis

The phenomenon of the continuous operation of the tool holder or the failure of a certain tool position and its causes The following is an example of a lathe equipped with a DTM sys

April 02, 2019
Ball bearing and tool holder for turning slender workpiece

The use of ball bearings and tool holders for the cutting of slender workpieces or soft materials (such as plastic bars) can achieve good processing res

March 27, 2019
A new type of tool holder

The method of clamping the tool by the tool holder is to clamp the tool by pulling force (see figure). The tool loading and unloading is very convenient and can improve the efficiency, and the effect

March 26, 2019
Multi-purpose boring tool holder

In our production, we use the multi-purpose fine-tuning boring tool holder (see Figure 1a) to solve the difficulty of boring and milling the groove on t

March 20, 2019
Selection of CNC machine tool holder system

The choice of tool system is one of the important contents in the configuration of CNC machine tools, because the tool system not only affects the production efficiency of CNC machine tools, but also

Elenco prodotti correlati
mobile Site

Copyright © 2024 JINING QINFENG MACHINERY HARDWARE CO.,LTDTutti i diritti riservati

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Invia